Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 53213 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG5321365 × 100 × 28.7 mm | NSK5321365 × 100 × 28.7 mm | KOYO5321365 × 100 × 28.7 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | FAG | NSK | KOYO |
| Designation | 53213 | 53213 | 53213 |
| Product family | — | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 65 mm | 65 mm | 65 mm |
| Outside diameterD | 100 mm | 100 mm | 100 mm |
| WidthB | 28.7 mm | 28.7 mm | 28.7 mm |
| Fatigue load limitPu | — | — | 8.5 kN |
| Reference speednref | 4900 r/min | — | — |
| Limiting speednG | 2600 r/min | — | 1900 r/min |
| Mass≈m | 0.727 kg | 0.812 kg | 0.75 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — |
| Cage | JP — Steel sheet metal | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — |
| Additional information | |||
| Seat washer | U213 | — | — |
| Aligning-seat geometry | |||
| Aligning-seat geometric referenceA | — | 40 mm | — |
| Spherical seat radiusR | — | 80 mm | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd | — | 65 mm | — |
| Overall outside diameterD | — | 100 mm | — |
| Complete assembled heightT3 | — | 28.7 mm | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | 75500 N | — |
| Basic static axial load ratingC0a | — | 189000 N | — |
| Calculation factors | |||
| Minimum load factorA | 0.14 | — | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | Yes | — | — |
| Suitable for grease lubrication | Yes | — | — |
| Suitable for oil lubrication | Yes | — | — |
| Unsealed design | Yes | — | — |
| Staticangularerrorandmisalignment | Yes | — | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | 1 mm | — |
| Classification | |||
| Official Category Path | — | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | |||
| Shaft washer outside diameterd1 | — | 100 mm | — |
| Housing washer bore diameterD1 | — | 67 mm | — |
| Construction | |||
| Axial load directions | — | One direction | — |
| Seat construction | — | Aligning seat | — |
| Radial-load support | — | Not suitable for radial load; separate radial support required | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | 1 mm | — | — |
| Minimum chamfer dimensionrmin | 0.039 in | — | — |
| Inner diameter housing washerD1 | 67 mm | — | — |
| Inner diameter housing washerD1 | 2.638 in | — | — |
| Outer diameter shaft washerd1 | 100 mm | — | — |
| Outer diameter shaft washerd1 | 3.937 in | — | — |
| Radius spherical housing washerR | 80 mm | — | — |
| Radius spherical housing washerR | 3.15 in | — | — |
| Distance of the center pointA | 40 mm | — | — |
| Distance of the center pointA | 1.575 in | — | — |
| Height with seat washerT1 | 32 mm | — | — |
| Height with seat washerT1 | 1.26 in | — | — |
| Bore diameter seat washerD2 | 82 mm | — | — |
| Bore diameter seat washerD2 | 3.228 in | — | — |
| Outside diameter seat washerD3 | 105 mm | — | — |
| Outside diameter seat washerD3 | 4.134 in | — | — |
| Height seat washerC | 9 mm | — | — |
| Height seat washerC | 0.354 in | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | 1900 r/min | — |
| Limiting speed — oil | — | 2800 r/min | — |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | 65 mm | — | — |
| Inner diameter shaft washerd | 2.559 in | — | — |
| Outer diameter housing washerD | 100 mm | — | — |
| Outer diameter housing washerD | 3.937 in | — | — |
| Basic dynamic load rating, axialCa | 74,800 N | — | — |
| Basic dynamic load rating, axialCa | 16,816.547 lbf | — | — |
| Basic static load rating, axialC0a | 188,000 N | — | — |
| Basic static load rating, axialC0a | 42,266.187 lbf | — | — |
| Fatigue load limit, axialCua | 8,545 N | — | — |
| Fatigue load limit, axialCua | 1,921.088 lbf | — | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | 394726 | — | — |
| Official Class Key | — | — | 070-010-000 |
| Base Type | 53213 | — | — |
| Gpsd Group | S03 | — | — |
| Product Line Id | 14 | — | — |
| X Life Marking | n.r. | — | — |
| SAP material number | 0190025210000 | — | — |
| Base product | 2305100101 | — | — |
| Bearing X designation | 53213 | — | — |
| Mounting Manager ID | 53213 | — | — |
| Grease application ID | 53213 | — | — |
| Mass reference | |||
| Approximate assembly mass | — | 0.812 kg | — |
| Mounting dimensions | |||
| Minimum shaft abutment diameterda min. | — | 86 mm | — |
| Maximum housing abutment diameterDa max. | — | 79 mm | — |
| Maximum housing-side fillet radiusra max. | — | 1 mm | — |
| Minimum diameter shaft shoulderda min | 86 mm | — | — |
| Minimum diameter shaft shoulderda min | 3.386 in | — | — |
| Maximum diameter of housing shoulderDa max | 82 mm | — | — |
| Maximum diameter of housing shoulderDa max | 3.228 in | — | — |
| Maximum filled radiusra max | 1 mm | — | — |
| Maximum filled radiusra max | 0.039 in | — | — |
| Product characteristics | |||
| Tolerance classPN | Normal (ISO 492:2023) | — | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — | — |
| Product Identity | |||
| Construction | Axial deep groove ball bearing 532, single direction, with spherical housing washer, steel sheet metal cage | — | — |
| Short Description | Axial deep groove ball bearing | — | — |
| Technical Data | |||
| d | — | — | 100 mm |
| T | — | — | 28.7 mm |
| R(Min.) | — | — | 1 mm |
| Bore Diameter (D) | 65 mm | — | — |
| Basic Load Ratings Ca | — | — | 93.6 kN |
| Outside Diameter (D) | 100 mm | — | — |
| Basic Load Ratings C0A | — | — | 189 kN |
| Width (B) | 28.7 mm | — | — |
| Fatigue Load Limit : Cu | — | — | 8.5 kN |
| Basic Dynamic Load Rating, Axial (Ca) | 74,800 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 1900 min-1 |
| Basic Static Load Rating, Axial (C0A) | 188,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 2900 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — | — |
| D1(Max.) | — | — | 100 mm |
| Limiting Speed (Ng) | 2,600 1/min | — | — |
| D1(Min.) | — | — | 67 mm |
| Operating Temperature Max. (Tmax) | 150 °C | — | — |
| D2 | — | — | - mm |
| Reference Speed (Nϑr) | 4,900 1/min | — | — |
| D3 | — | — | - mm |
| Bore Diameter Seat Washer (D2) | 82 mm | — | — |
| A | — | — | 40 mm |
| Height Seat Washer (C) | 9 mm | — | — |
| R | — | — | 80 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | 86 mm | — | — |
| C | — | — | - mm |
| Minimum Load Factor (A) | 0.14 | — | — |
| Da(Min.) | — | — | 86 mm |
| Outside Diameter Seat Washer (D3) | 105 mm | — | — |
| Da(Max.) | — | — | 79 mm |
| Rip Diameter Shaft Washer (D1) | 100 mm | — | — |
| Ra(Max.) | — | — | 1 mm |
| Distance Of The Center Point (A) | 40 mm | — | — |
| Mass(Refer.) | — | — | 0.75 kg |
| Bore Diameter Housing Washer (D1) | 67 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 82 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | 1 mm | — | — |
| Height With Seat Washer (T1) | 32 mm | — | — |
| Maximum Fillet Radius (Ra Max) | 1 mm | — | — |
| Radius Spherical Housing Washer (R) | 80 mm | — | — |
| Fatigue Load Limit, Axial (Cua) | 8,545 N | — | — |
| Temperature range | |||
| Operating temperature min.Tmin | -30 °C | — | — |
| Operating temperature min.Tmin | -22 °F | — | — |
| Operating temperature max.Tmax | 150 °C | — | — |
| Operating temperature max.Tmax | 302 °F | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.