Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 5310 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | NSK531050 × 110 × 44.4 mm | KOYO531050 × 110 × 44.4 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | NSK | KOYO |
| Designation | 5310 | 5310 |
| Product family | Angular contact ball bearing | Double-row / Open |
| Detailed type | Angular contact ball bearings | Angular contact ball bearings |
| Bore diameterd | 50 mm | 50 mm |
| Outside diameterD | 110 mm | 110 mm |
| WidthB | 44.4 mm | 44.4 mm |
| Basic dynamic load ratingC | 89.5 kN | 111 kN |
| Basic static load ratingC0 | 61.5 kN | 67 kN |
| Fatigue load limitPu | — | 3.45 kN |
| Limiting speednG | — | 3600 r/min |
| Mass≈m | 1.84 kg | 1.93 kg |
| Sealing | Open | Open |
| Cage | Pressed steel | — |
| Boundary dimensions | ||
| Individual bearing widthB | 44.4 mm | — |
| Minimum bearing chamferr min. | 2 mm | — |
| Classification | ||
| Official Category Path | — | Angular contact ball bearings - Double-row - Open |
| Official Classification 1 | — | Angular contact ball bearings / Double-row / Open |
| Construction | ||
| Cage material and construction | Pressed steel | — |
| Construction / arrangement | Double-row angular contact bearing | — |
| Load ratings | ||
| Basic dynamic radial load ratingCr | 89500 N | — |
| Basic static radial load ratingC0r | 61500 N | — |
| Load-centre geometry | ||
| Load-centre spacinga0 | 55.6 mm | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | 4300 r/min | — |
| Limiting speed — oil | 5600 r/min | — |
| Manufacturer Identity | ||
| Official Class Key | — | 020-030-000 |
| Mass reference | ||
| Approximate mass | 1.84 kg | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterda min. | 60 mm | — |
| Maximum housing shoulder diameterDa max. | 100 mm | — |
| Maximum adjacent fillet radiusra max. | 2 mm | — |
| Technical Data | ||
| d | — | 110 mm |
| B | — | 44.4 mm |
| R(Min.) | — | 2 mm |
| Basic Load Ratings : Cr | — | 111 kN |
| Basic Load Ratings : C0R | — | 67.0 kN |
| Fatigue Load Limit : Cu | — | 3.45 kN |
| Limiting Speeds(Grease Lub.) | — | 3600 min-1 |
| Limiting Speeds(Oil Lub.) | — | 4800 min-1 |
| Load Center Spread : A | — | 56.6 mm |
| Da(Min.) | — | 60 mm |
| Da(Max.) | — | 100 mm |
| Ra(Max.) | — | 2 mm |
| Mass(Refer.) | — | 1.93 kg |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.