Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 52406 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF5240620 × 70 × mm | NSK5240620 × 70 × 52 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | NSK |
| Designation | 52406 | 52406 |
| Product family | Thrust ball bearings | Axial deep groove ball bearing |
| Detailed type | Double direction thrust ball bearing | Axial deep groove ball bearings |
| Bore diameterd | 20 mm | 20 mm |
| Outside diameterD | 70 mm | 70 mm |
| WidthB | — | 52 mm |
| HeightH | 52 mm | — |
| Basic dynamic load ratingC | 70.2 kN | — |
| Basic static load ratingC0 | 122 kN | — |
| Fatigue load limitPu | 4.5 kN | — |
| Reference speednref | 2200 r/min | — |
| Limiting speednG | 3200 r/min | — |
| Mass≈m | 0.944 kg | 0.978 kg |
| Cage | Sheet metal | — |
| Bearing material | Bearing steel | — |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 20 mm |
| Overall outside diameterD | — | 70 mm |
| Complete assembled heightT1 | — | 52 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 73000 N |
| Basic static axial load ratingC0a | — | 126000 N |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 1 mm |
| Minimum shaft-side chamferr1 min. | — | 0.6 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 70 mm |
| Housing washer bore diameterD1 | — | 32 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 30 mm |
| Central shaft washer thicknessB | — | 12 mm |
| Partial axial height in the assembly drawingT2 | — | 32 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Flat seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | 30 mm | — |
| Abutment diameter housingD a | max. 46 mm | — |
| Fillet radius housingr a | max. 1 mm | — |
| Fillet radius shaftr b | max. 0.6 mm | — |
| Engineering — Calculation data | ||
| Minimum load factorA | 0.1 | — |
| Engineering — Dimensions | ||
| Inner diameter housing washerD 1 | ≈ 32 mm | — |
| Height shaft washerB | 12 mm | — |
| Chamfer dimension housing washerr 1,2 | min. 1 mm | — |
| Chamfer dimension shaft washerr 3,4 | min. 0.6 mm | — |
| Logistics | ||
| Product net weight | 0.944 kg | — |
| eClass code | 23-05-10-01 | — |
| UNSPSC code | 31171507 | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 2200 r/min |
| Limiting speed — oil | — | 3200 r/min |
| Mass reference | ||
| Approximate assembly mass | — | 0.978 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 50 mm |
| Maximum housing-side fillet radiusra max. | — | 1 mm |
| Maximum shaft-side fillet radiusrb max. | — | 0.6 mm |
| Product identity | ||
| Official product category | Thrust ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/thrust-ball-bearings | — |
| Structure group ID | BE1_001_002 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Properties | ||
| Axial load capability | Double-direction | — |
| Number of rows | 2 | — |
| Housing washer type | Flat | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Indicative carbon footprint for new product | 3.5 kg CO 2 e | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.