Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 52230 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF52230 M130 × 215 × mm | FAG52230-MP130 × 215 × 89 mm | NSK52230X130 × 215 × 89 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | 52230 M | 52230-MP | 52230X |
| Product family | Thrust ball bearings | — | Axial deep groove ball bearing |
| Detailed type | Double direction thrust ball bearing | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | — | 52230 | — |
| Bore diameterd | 130 mm | 130 mm | 130 mm |
| Outside diameterD | 215 mm | 215 mm | 215 mm |
| WidthB | — | 89 mm | 89 mm |
| HeightH | 89 mm | — | — |
| Basic dynamic load ratingC | 247 kN | — | — |
| Basic static load ratingC0 | 800 kN | — | — |
| Fatigue load limitPu | 21.6 kN | — | — |
| Reference speednref | 950 r/min | 2550 r/min | — |
| Limiting speednG | 1300 r/min | 1950 r/min | — |
| Mass≈m | 11.3 kg | 11.463 kg | 10.4 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Cage | Machined brass | MP — Solid brass cage, rolling element guided | — |
| Bearing material | Bearing steel | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Assembly boundary dimensions | |||
| Shaft-washer bore diameterd2 | — | — | 130 mm |
| Overall outside diameterD | — | — | 215 mm |
| Complete assembled heightT1 | — | — | 89 mm |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | — | 238000 N |
| Basic static axial load ratingC0a | — | — | 735000 N |
| Calculation factors | |||
| Minimum load factorA | 3.3 | 2.9 | — |
| Capabilities & suitability | |||
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Chamfers | |||
| Minimum housing-side chamferr min. | — | — | 1.5 mm |
| Minimum shaft-side chamferr1 min. | — | — | 1.1 mm |
| Component dimensions | |||
| Central shaft washer outside diameterd3 | — | — | 214.5 mm |
| Housing washer bore diameterD1 | — | — | 153 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | — | 150 mm |
| Central shaft washer thicknessB | — | — | 20 mm |
| Partial axial height in the assembly drawingT2 | — | — | 54.5 mm |
| Construction | |||
| Axial load directions | — | — | Both directions |
| Seat construction | — | — | Flat seat |
| Radial-load support | — | — | Not suitable for radial load; separate radial support required |
| Dimensions | |||
| Inner diameter housing washerD1 | — | 153 mm | — |
| Inner diameter housing washerD1 | — | 6.024 in | — |
| Height shaft washerB | 20 mm | 20 mm | — |
| Height shaft washerB | — | 0.787 in | — |
| Minimum chamfer dimensionrmin | — | 1.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.059 in | — |
| Minimum chamfer dimensionr1 min | — | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.043 in | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | 150 mm | — | — |
| Abutment diameter housingD a | max. 176 mm | — | — |
| Fillet radius housingr a | max. 1.5 mm | — | — |
| Fillet radius shaftr b | max. 1 mm | — | — |
| Engineering — Dimensions | |||
| Inner diameter housing washerD 1 | ≈ 153 mm | — | — |
| Chamfer dimension housing washerr 1,2 | min. 1.5 mm | — | — |
| Chamfer dimension shaft washerr 3,4 | min. 1.1 mm | — | — |
| Logistics | |||
| Product net weight | 11.3 kg | — | — |
| eClass code | 23-05-10-01 | — | — |
| UNSPSC code | 31171507 | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | — | 900 r/min |
| Limiting speed — oil | — | — | 1300 r/min |
| Main Dimensions & Performance Data | |||
| Inner diameter shaft washerd | — | 130 mm | — |
| Inner diameter shaft washerd | — | 5.118 in | — |
| Outer diameter housing washerD | — | 215 mm | — |
| Outer diameter housing washerD | — | 8.465 in | — |
| Basic dynamic load rating, axialCa | — | 236,000 N | — |
| Basic dynamic load rating, axialCa | — | 53,057.554 lbf | — |
| Basic static load rating, axialC0a | — | 730,000 N | — |
| Basic static load rating, axialC0a | — | 164,118.705 lbf | — |
| Fatigue load limit, axialCua | — | 24,900 N | — |
| Fatigue load limit, axialCua | — | 5,598.022 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 394934 | — |
| Base Type | — | 52230 | — |
| Old Designation | — | ["52230MP"] | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0190655820000 | — |
| Base product | — | 2305100102 | — |
| Bearing X designation | — | 52230-MP | — |
| Mounting Manager ID | — | 52230-MP | — |
| Grease application ID | — | 52230-MP | — |
| Mass reference | |||
| Approximate assembly mass | — | — | 10.4 kg |
| Mounting dimensions | |||
| Maximum housing abutment diameterDa max. | — | — | 180 mm |
| Maximum housing-side fillet radiusra max. | — | — | 1.5 mm |
| Maximum shaft-side fillet radiusrb max. | — | — | 1 mm |
| Maximum diameter shaft shoulderda max | — | 150 mm | — |
| Maximum diameter shaft shoulderda max | — | 5.906 in | — |
| Maximum diameter of housing shoulderDa max | — | 176 mm | — |
| Maximum diameter of housing shoulderDa max | — | 6.929 in | — |
| Maximum filled radiusra max | — | 1.5 mm | — |
| Maximum filled radiusra max | — | 0.059 in | — |
| Maximum filled radiusra1 max | — | 1 mm | — |
| Maximum filled radiusra1 max | — | 0.039 in | — |
| Product characteristics | |||
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Product identity | |||
| Official product category | Thrust ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/thrust-ball-bearings | — | — |
| Structure group ID | BE1_001_002 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial deep groove ball bearing 522..-MP, double direction, solid brass cage | — |
| Short Description | — | Axial deep groove ball bearing | — |
| Properties | |||
| Axial load capability | Double-direction | — | — |
| Number of rows | 2 | — | — |
| Housing washer type | Flat | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Indicative carbon footprint for new product | 42.0 kg CO 2 e | — | — |
| Technical Data | |||
| Inner Diameter Shaft Washer (D) | — | 130 mm | — |
| Outside Diameter (D) | — | 215 mm | — |
| Height (T2) | — | 89 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | — | 236,000 N | — |
| Basic Static Load Rating, Axial (C0A) | — | 730,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 1,950 1/min | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Reference Speed (Nϑr) | — | 2,550 1/min | — |
| Height Shaft Washer (B) | — | 20 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 150 mm | — |
| Minimum Load Factor (A) | — | 2.9 | — |
| Bore Diameter Housing Washer (D1) | — | 153 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 176 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 1 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.1 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 24,900 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.