Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 51422 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | NSK51422X110 × 230 × 95 mm | KOYO51422110 × 230 × 95 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | NSK | KOYO |
| Designation | 51422X | 51422 |
| Product family | Axial deep groove ball bearing | Single direction / With flat back faces |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Bore diameterd | 110 mm | 110 mm |
| Outside diameterD | 230 mm | 230 mm |
| WidthB | 95 mm | 95 mm |
| Fatigue load limitPu | — | 37.1 kN |
| Limiting speednG | — | 550 r/min |
| Mass≈m | 20 kg | 19.8 kg |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd | 110 mm | — |
| Overall outside diameterD | 230 mm | — |
| Complete assembled heightT | 95 mm | — |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | 415000 N | — |
| Basic static axial load ratingC0a | 1150000 N | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | 3 mm | — |
| Classification | ||
| Official Category Path | — | Thrust ball bearings - Single direction - With flat back faces |
| Official Classification 1 | — | Thrust ball bearings / Single direction / With flat back faces |
| Component dimensions | ||
| Shaft washer outside diameterd1 | 225 mm | — |
| Housing washer bore diameterD1 | 113 mm | — |
| Construction | ||
| Axial load directions | One direction | — |
| Seat construction | Flat seat | — |
| Radial-load support | Not suitable for radial load; separate radial support required | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | 630 r/min | — |
| Limiting speed — oil | 950 r/min | — |
| Manufacturer Identity | ||
| Official Class Key | — | 070-010-000 |
| Mass reference | ||
| Approximate assembly mass | 20 kg | — |
| Mounting dimensions | ||
| Minimum shaft abutment diameterda min. | 181 mm | — |
| Maximum housing abutment diameterDa max. | 159 mm | — |
| Maximum housing-side fillet radiusra max. | 2.5 mm | — |
| Technical Data | ||
| d | — | 230 mm |
| T | — | 95 mm |
| R(Min.) | — | 3 mm |
| Basic Load Ratings Ca | — | 474 kN |
| Basic Load Ratings C0A | — | 1070 kN |
| Fatigue Load Limit : Cu | — | 37.1 kN |
| Limiting Speeds(Grease Lub.) | — | 550 min-1 |
| Limiting Speeds(Oil Lub.) | — | 850 min-1 |
| D1(Max.) | — | 225 mm |
| D1(Min.) | — | 113 mm |
| D2 | — | - mm |
| D3 | — | - mm |
| A | — | - mm |
| R | — | - mm |
| C | — | - mm |
| Da(Min.) | — | 181 mm |
| Da(Max.) | — | 159 mm |
| Ra(Max.) | — | 2.5 mm |
| Mass(Refer.) | — | 19.8 kg |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.