Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 31324 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG31324-X120 × 260 × 68 mm | TIMKEN31324X120 × 260 × 68 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 31324-X | 31324X |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | 31324 | 31324X |
| Bore diameterd | 120 mm | 120 mm |
| Outside diameterD | 260 mm | 260 mm |
| WidthB | 68 mm | 68 mm |
| Basic dynamic load ratingC | 540 kN | 642 kN |
| Basic static load ratingC0 | 700 kN | 777 kN |
| Fatigue load limitPu | 84 kN | — |
| Reference speednref | 2020 r/min | — |
| Limiting speednG | 2600 r/min | — |
| Mass≈m | 14 kg | 15.38 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T7GB120 | — |
| Calculation Factors | ||
| K Factor | — | 0.71 |
| Y1 Factor | — | 0.73 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.40 |
| E Factor | — | 0.83 |
| Cg Factor | — | 0.1382 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.83 | — |
| Dynamic axial load factorY | 0.73 | — |
| Static axial load factorY0 | 0.4 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 4 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.157 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 3 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.118 in | — |
| Distance between the apexes of the pressure conesa | 82 mm | — |
| Distance between the apexes of the pressure conesa | 3.228 in | — |
| Guidance rib diameter of inner ringd1 | 192 mm | — |
| Guidance rib diameter of inner ringd1 | 7.559 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 62 mm | — |
| Width, inner ringB | 2.441 in | — |
| Width, outer ringC | 42 mm | — |
| Width, outer ringC | 1.654 in | — |
| Width, totalT | 68 mm | — |
| Width, totalT | 2.677 in | — |
| Basic dynamic load rating, radialCr | 540,000 N | — |
| Basic dynamic load rating, radialCr | 121,402.878 lbf | — |
| Basic static load rating, radialC0r | 700,000 N | — |
| Basic static load rating, radialC0r | 157,374.101 lbf | — |
| Fatigue load limit, radialCur | 84,000 N | — |
| Fatigue load limit, radialCur | 18,884.892 lbf | — |
| Thermal speed ratingnϑr | 2,020 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 383498 | — |
| Material Number | — | 000000000190021162 |
| Base Type | 31324 | — |
| World Assembly Part Number | — | X31324XM_Y31324XM |
| Old Designation | ["31324X"] | — |
| Inner Ring Part Number | — | X31324XM |
| Gpsd Group | F04 | — |
| Outer Ring Part Number | — | Y31324XM |
| Product Line Id | 64 | — |
| Drawing Number | — | E-50963 |
| X Life Marking | n.r. | — |
| Upc | — | 0053893776163 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:48.503 |
| SAP material number | 0167114160000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 31324-X | — |
| Mounting Manager ID | 31324-X | — |
| Grease application ID | 31324-X | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 145 mm | — |
| Maximum diameter of shaft shoulderda max | 5.709 in | — |
| Minimum diameter of shaft shoulderdb min | 134 mm | — |
| Minimum diameter of shaft shoulderdb min | 5.276 in | — |
| Minimum diameter of housing shoulderDa min | 203 mm | — |
| Minimum diameter of housing shoulderDa min | 7.992 in | — |
| Maximum diameter of housing shoulderDa max | 246 mm | — |
| Maximum diameter of housing shoulderDa max | 9.685 in | — |
| Minimum diameter of housing shoulderDb min | 244 mm | — |
| Minimum diameter of housing shoulderDb min | 9.606 in | — |
| Minimum axial spaceCa min | 9 mm | — |
| Minimum axial spaceCa min | 0.354 in | — |
| Minimum axial spaceCb min | 26 mm | — |
| Minimum axial spaceCb min | 1.024 in | — |
| Maximum fillet radius of shaftra max | 4 mm | — |
| Maximum fillet radius of shaftra max | 0.157 in | — |
| Maximum fillet radius of housingrb max | 3 mm | — |
| Maximum fillet radius of housingrb max | 0.118 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 313, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 4.7244 in Bore | 10.2362 in OD | 2.6772 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K |
| Type Description | — | TS - Tapered Single |
| Short Description | Tapered roller bearing | — |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 120 mm | — |
| Overall Width | — | 85.900 mm |
| Outside Diameter (D) | 260 mm | — |
| Radial Rating | — | 166,000 N |
| Width (B) | 68 mm | — |
| Axial Rating | — | 235,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | 540,000 N | — |
| Dynamic Rating C1 | — | 642,000 N |
| Basic Static Load Rating, Radial (C0R) | 700,000 N | — |
| Dynamic Rating C90 | — | 166,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 235,000 N |
| Limiting Speed (Ng) | 2,600 1/min | — |
| Dynamic Axial Rating Ca1 | — | 907,000 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Static Radial Rating C0 | — | 777,000 N |
| Reference Speed (Nϑr) | 2,020 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 3 mm | — |
| Static Axial Rating C0A | — | 1,870,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 3 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 203 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 244 mm | — |
| Width, Outer Ring (C) | 42 mm | — |
| Fatigue Load Limit, Radial (Cur) | 84,000 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.83 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 145 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 134 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 246 mm | — |
| Dynamic Axial Load Factor (Y) | 0.73 | — |
| Maximum Fillet Radius (Ra Max) | 4 mm | — |
| Minimum Axial Space (Cb Min) | 26 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 4 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 192 mm | — |
| Minimum Axial Space (Ca Min) | 9 mm | — |
| Width, Inner Ring (B) | 62 mm | — |
| Static Axial Load Factor (Y0) | 0.4 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 82 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.