Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 30215 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG30215-A75 × 130 × 27.25 mm | TIMKEN3021575 × 130 × 27.25 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 30215-A | 30215 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | 30215 | 30215 |
| Bore diameterd | 75 mm | 75 mm |
| Outside diameterD | 130 mm | 130 mm |
| WidthB | 27.25 mm | 27.25 mm |
| Basic dynamic load ratingC | 135 kN | 181 kN |
| Basic static load ratingC0 | 169 kN | 180 kN |
| Fatigue load limitPu | 20.2 kN | — |
| Reference speednref | 3600 r/min | — |
| Limiting speednG | 5500 r/min | — |
| Mass≈m | 1.382 kg | 1.35 kg |
| Precision class | PN — Normal (ISO 492:2023) | ABMA Class K |
| Sealing | — | Open |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | Steel cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Additional information | ||
| Comparative designation to ISO 10317 and ISO 355 | T4DB075 | — |
| Calculation Factors | ||
| K Factor | — | 1.34 |
| Y1 Factor | — | 1.38 |
| Y2 Factor | — | 0.00 |
| Y0 Factor | — | 0.76 |
| E Factor | — | 0.44 |
| Cg Factor | — | 0.0716 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.43 | — |
| Dynamic axial load factorY | 1.38 | — |
| Static axial load factorY0 | 0.76 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 2 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.079 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 1.5 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.059 in | — |
| Distance between the apexes of the pressure conesa | 27 mm | — |
| Distance between the apexes of the pressure conesa | 1.063 in | — |
| Guidance rib diameter of inner ringd1 | 100.1 mm | — |
| Guidance rib diameter of inner ringd1 | 3.941 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 25 mm | — |
| Width, inner ringB | 0.984 in | — |
| Width, outer ringC | 22 mm | — |
| Width, outer ringC | 0.866 in | — |
| Width, totalT | 27.25 mm | — |
| Width, totalT | 1.073 in | — |
| Basic dynamic load rating, radialCr | 135,000 N | — |
| Basic dynamic load rating, radialCr | 30,350.719 lbf | — |
| Basic static load rating, radialC0r | 169,000 N | — |
| Basic static load rating, radialC0r | 37,994.604 lbf | — |
| Fatigue load limit, radialCur | 20,200 N | — |
| Fatigue load limit, radialCur | 4,541.367 lbf | — |
| Thermal speed ratingnϑr | 3,600 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 383374 | — |
| Material Number | — | 000000000190042566 |
| Base Type | 30215 | — |
| World Assembly Part Number | — | X30215G_Y30215G |
| Old Designation | ["30215A","30215A.F22"] | — |
| Inner Ring Part Number | — | X30215G |
| Gpsd Group | F05 | — |
| Outer Ring Part Number | — | Y30215G |
| Product Line Id | 64 | — |
| Drawing Number | — | B-193745 |
| X Life Marking | n.r. | — |
| Upc | — | 0053893454160 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:46.73 |
| SAP material number | 0167106300000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | 30215-A | — |
| Mounting Manager ID | 30215-A | — |
| Grease application ID | 30215-A | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 86 mm | — |
| Maximum diameter of shaft shoulderda max | 3.386 in | — |
| Minimum diameter of shaft shoulderdb min | 84 mm | — |
| Minimum diameter of shaft shoulderdb min | 3.307 in | — |
| Minimum diameter of housing shoulderDa min | 115 mm | — |
| Minimum diameter of housing shoulderDa min | 4.528 in | — |
| Maximum diameter of housing shoulderDa max | 121 mm | — |
| Maximum diameter of housing shoulderDa max | 4.764 in | — |
| Minimum diameter of housing shoulderDb min | 124 mm | — |
| Minimum diameter of housing shoulderDb min | 4.882 in | — |
| Minimum axial spaceCa min | 4 mm | — |
| Minimum axial spaceCa min | 0.157 in | — |
| Minimum axial spaceCb min | 5 mm | — |
| Minimum axial spaceCb min | 0.197 in | — |
| Maximum fillet radius of shaftra max | 2 mm | — |
| Maximum fillet radius of shaftra max | 0.079 in | — |
| Maximum fillet radius of housingrb max | 1.5 mm | — |
| Maximum fillet radius of housingrb max | 0.059 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings 302, main dimensions acc. to DIN 720, separable | Single Row Tapered Roller Bearing Assembly | Imperial Series | 2.9528 in Bore | 5.1181 in OD | 1.0728 in Width | Open | Cylindrical Bore | Steel Cage | Precision ABMA Class K |
| Type Description | — | TS - Tapered Single |
| Short Description | Tapered roller bearing | — |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 75 mm | — |
| Overall Width | — | 30.900 mm |
| Outside Diameter (D) | 130 mm | — |
| Radial Rating | — | 46,800 N |
| Width (B) | 27.25 mm | — |
| Axial Rating | — | 34,900 N |
| Basic Dynamic Load Rating, Radial (Cr) | 135,000 N | — |
| Dynamic Rating C1 | — | 181,000 N |
| Basic Static Load Rating, Radial (C0R) | 169,000 N | — |
| Dynamic Rating C90 | — | 46,800 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 34,900 N |
| Limiting Speed (Ng) | 5,500 1/min | — |
| Dynamic Axial Rating Ca1 | — | 134,000 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Static Radial Rating C0 | — | 180,000 N |
| Reference Speed (Nϑr) | 3,600 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 1.5 mm | — |
| Static Axial Rating C0A | — | 228,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 1.5 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 115 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 124 mm | — |
| Width, Outer Ring (C) | 22 mm | — |
| Fatigue Load Limit, Radial (Cur) | 20,200 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.43 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 86 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 84 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 121 mm | — |
| Dynamic Axial Load Factor (Y) | 1.38 | — |
| Maximum Fillet Radius (Ra Max) | 2 mm | — |
| Minimum Axial Space (Cb Min) | 5 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 2 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 100.1 mm | — |
| Minimum Axial Space (Ca Min) | 4 mm | — |
| Width, Inner Ring (B) | 25 mm | — |
| Static Axial Load Factor (Y0) | 0.76 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 27 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.