Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 29396 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG29396-E1-XL-MB480 × 730 × 150 mm | KOYO29396480 × 730 × 51 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 29396-E1-XL-MB | 29396 |
| Detailed type | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | 29396 | — |
| Bore diameterd | 480 mm | 480 mm |
| Outside diameterD | 730 mm | 730 mm |
| WidthB | 150 mm | 51 mm |
| Reference speednref | 415 r/min | — |
| Limiting speednG | 820 r/min | 390 r/min |
| Mass≈m | 214.5 kg | 218 kg |
| Cage | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Classification | ||
| Official Category Path | — | Spherical thrust roller bearings |
| Official Classification 1 | — | Spherical thrust roller bearings |
| Dimensions | ||
| Bore diameter housing washerD1 | 591 mm | — |
| Bore diameter housing washerD1 | 23.268 in | — |
| Rip diameter shaft washerd1 | 680 mm | — |
| Rip diameter shaft washerd1 | 26.772 in | — |
| Minimum chamfer dimensionrmin | 6 mm | — |
| Minimum chamfer dimensionrmin | 0.236 in | — |
| Height of the housing washerT1 | 73.5 mm | — |
| Height of the housing washerT1 | 2.894 in | — |
| Height of shaft washerT2 | 54 mm | — |
| Height of shaft washerT2 | 2.126 in | — |
| Height of the shaft washerT3 | 94 mm | — |
| Height of the shaft washerT3 | 3.701 in | — |
| Height of shaft washer, inc. lip ringT4 | 144 mm | — |
| Height of shaft washer, inc. lip ringT4 | 5.669 in | — |
| Distance of the center pointA | 270 mm | — |
| Distance of the center pointA | 10.63 in | — |
| Main Dimensions & Performance Data | ||
| Section heightT | 150 mm | — |
| Section heightT | 5.906 in | — |
| Basic dynamic load rating, axialCa | 5,800,000 N | — |
| Basic dynamic load rating, axialCa | 1,303,956.835 lbf | — |
| Basic static load rating, axialC0a | 21,400,000 N | — |
| Basic static load rating, axialC0a | 4,811,151.079 lbf | — |
| Fatigue load limit, axialCua | 2,190,000 N | — |
| Fatigue load limit, axialCua | 492,356.115 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 396516 | — |
| Official Class Key | — | 080-000-000 |
| Base Type | 29396 | — |
| Old Designation | ["29396-E1-MB"] | — |
| Gpsd Group | F03 | — |
| Product Line Id | 78 | — |
| X Life Marking | XL | — |
| SAP material number | 0390001250000 | — |
| Base product | 2305110301 | — |
| Bearing X designation | 29396-E1-XL-MB | — |
| Mounting Manager ID | 29396-E1-XL-MB | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 605 mm | — |
| Minimum diameter shaft shoulderda min | 23.819 in | — |
| Maximum diameter of housing shoulderDa max | 660 mm | — |
| Maximum diameter of housing shoulderDa max | 25.984 in | — |
| Minimum bore diameter housingDb min | 746 mm | — |
| Minimum bore diameter housingDb min | 29.37 in | — |
| Maximum distance sleevedb max | 511 mm | — |
| Maximum distance sleevedb max | 20.118 in | — |
| Maximum recess radiusra max | 5 mm | — |
| Maximum recess radiusra max | 0.197 in | — |
| Product characteristics | ||
| Heat treatment | Standard | — |
| Locating feature, housing washer | Without | — |
| Handling thread holes | Without | — |
| Constricted width and inclination variation | Standard | — |
| Test certificate | Without | — |
| Product Identity | ||
| Construction | Axial spherical roller bearing 293..-E1-XL-MB, with flanging ring | — |
| Short Description | Axial spherical roller bearing | — |
| Technical Data | ||
| d | — | 730 mm |
| T | — | 150 mm |
| R(Min.) | — | 6 mm |
| Basic Load Ratings Ca | — | 3650 kN |
| Basic Load Ratings C0A | — | 15800 kN |
| Bore Diameter (D) | 480 mm | — |
| Limiting Speeds(Oil Lub.) | — | 390 min-1 |
| Outside Diameter (D) | 730 mm | — |
| D1 | — | 590 mm |
| Height (T) | 150 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 5,800,000 N | — |
| B | — | 51 mm |
| Basic Static Load Rating, Axial (C0A) | 21,400,000 N | — |
| B1 | — | 144 mm |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| C | — | 72 mm |
| Limiting Speed (Ng) | 820 1/min | — |
| A | — | 270 mm |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Da(Min.) | — | 595 mm |
| Reference Speed (Nϑr) | 415 1/min | — |
| Da(Max.) | — | 650 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | 746 mm | — |
| Ra(Max.) | — | 5 mm |
| Bore Diameter Housing Washer (D1) | 591 mm | — |
| Mass(Refer.) | — | 218 kg |
| Height Of Shaft Washer (T2) | 54 mm | — |
| Height Of The Housing Washer (T1) | 73.5 mm | — |
| Rip Diameter Shaft Washer (D1) | 680 mm | — |
| Height Of The Shaft Washer (T3) | 94 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | 605 mm | — |
| Distance Of The Center Point (A) | 270 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | 144 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 660 mm | — |
| Maximum Distance Sleeve (Db Max) | 511 mm | — |
| Minimum Chamfer Dimension (Rmin) | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | 2,190,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.