Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 2300 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | NSK230010 × 35 × 17 mm | KOYO2300-6872-10CS28 × 80 × 21 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | NSK | KOYO |
| Designation | 2300 | 2300-6872-10CS |
| Product family | Self-aligning ball bearing | Automotive bearings |
| Detailed type | Self-aligning ball bearings | Automotive bearings |
| Bore diameterd | 10 mm | 28 mm |
| Outside diameterD | 35 mm | 80 mm |
| WidthB | 17 mm | 21 mm |
| Basic dynamic load ratingC | 10.1 kN | — |
| Basic static load ratingC0 | 2.01 kN | — |
| Mass≈m | 0.08 kg | 0.585 kg |
| Boundary dimensions | ||
| Bearing widthB | 17 mm | — |
| Minimum bearing chamferr min. | 0.6 mm | — |
| Classification | ||
| Official Category Path | — | Automotive bearings - Automotive bearings |
| Official Classification 1 | — | Automotive bearings |
| Construction | ||
| Bore construction | Cylindrical bore | — |
| Equivalent-load factors | ||
| Dynamic load ratio thresholde | 0.71 | — |
| Dynamic axial factor above thresholdY2 | 1.4 | — |
| Dynamic axial factor at or below thresholdY3 | 0.89 | — |
| Static axial load factorY0 | 0.93 | — |
| Load ratings | ||
| Basic dynamic radial load ratingCr | 10100 N | — |
| Basic static radial load ratingC0r | 2010 N | — |
| Lubrication-qualified speed | ||
| Limiting speed with grease | 18000 r/min | — |
| Limiting speed with oil | 22000 r/min | — |
| Manufacturer Identity | ||
| Official Class Key | — | 200-010-000 |
| Mounting dimensions | ||
| Minimum shaft shoulder diameterda min. | 14 mm | — |
| Maximum housing shoulder diameterDa max. | 31 mm | — |
| Maximum adjacent fillet radiusra max. | 0.6 mm | — |
| Reference mass | ||
| Approximate catalogue mass | 0.08 kg | — |
| Technical Data | ||
| Stockno. | — | 70208 |
| d | — | 80 mm |
| B | — | 21 mm |
| Mass (Reference) | — | 0.585 kg |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.