Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 1322 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF1322 M110 × 240 × 50 mm | FAG1322-M110 × 240 × 50 mm | NSK1322110 × 240 × 50 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | 1322 M | 1322-M | 1322 |
| Product family | Self-aligning ball bearings | — | Self-aligning ball bearing |
| Detailed type | Self-aligning ball bearings | Self-aligning ball bearings | Self-aligning ball bearings |
| Series | — | 1322 | — |
| Bore diameterd | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm |
| WidthB | 50 mm | 50 mm | 50 mm |
| Basic dynamic load ratingC | 163 kN | 165 kN | 177 kN |
| Basic static load ratingC0 | 72 kN | 72 kN | 72 kN |
| Fatigue load limitPu | 2.75 kN | 3.4 kN | — |
| Reference speednref | 5300 r/min | 3400 r/min | — |
| Limiting speednG | 3600 r/min | 4200 r/min | — |
| Mass≈m | 11.9 kg | 11.8 kg | 11.5 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | Without — Not sealed | — |
| Cage | Machined brass | M — Solid brass cage, ball guided | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Boundary dimensions | |||
| Bearing widthB | — | — | 50 mm |
| Minimum bearing chamferr min. | — | — | 3 mm |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.23 | — |
| Dynamic axial load factorY1 | — | 2.78 | — |
| Dynamic axial load factorY2 | — | 4.3 | — |
| Static axial load factorY0 | — | 2.91 | 3 |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Construction | |||
| Bore construction | — | — | Cylindrical bore |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 3 mm | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — |
| Shoulder diameter outer ringD1 | — | 202.5 mm | — |
| Shoulder diameter outer ringD1 | — | 7.972 in | — |
| Shoulder diameter inner ringd1 | — | 154.46 mm | — |
| Shoulder diameter inner ringd1 | — | 6.081 in | — |
| Overhang rolling elementC1 | — | 2.7 mm | — |
| Overhang rolling elementC1 | — | 0.106 in | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | min. 124 mm | — | — |
| Abutment diameter housingD a | max. 226 mm | — | — |
| Fillet radiusr a | max. 3 mm | — | — |
| Engineering — Calculation data | |||
| Permissible angular misalignmentα | 3 ° | — | — |
| Calculation factork r | 0.05 | — | — |
| Limiting valuee | 0.22 | — | — |
| Calculation factorY 0 | 2.8 | — | — |
| Calculation factorY 1 | 2.9 | — | — |
| Calculation factorY 2 | 4.5 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter inner ringd 1 | ≈ 154.35 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 202.9 mm | — | — |
| Protrusion of the balls from bearing side facesC 1 | 2.512 mm | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — |
| Engineering — Engineering specifications | |||
| Bore type | Cylindrical | — | — |
| Equivalent-load factors | |||
| Dynamic load ratio thresholde | — | — | 0.22 |
| Dynamic axial factor above thresholdY2 | — | — | 4.4 |
| Dynamic axial factor at or below thresholdY3 | — | — | 2.8 |
| Load ratings | |||
| Basic dynamic radial load ratingCr | — | — | 177000 N |
| Basic static radial load ratingC0r | — | — | 72000 N |
| Logistics | |||
| Product net weight | 11.9 kg | — | — |
| eClass code | 23-05-08-06 | — | — |
| UNSPSC code | 31171532 | — | — |
| Lubrication-qualified speed | |||
| Limiting speed with grease | — | — | 2400 r/min |
| Limiting speed with oil | — | — | 3000 r/min |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 165,000 N | — |
| Basic dynamic load rating, radialCr | — | 37,095.324 lbf | — |
| Basic static load rating, radialC0r | — | 72,000 N | — |
| Basic static load rating, radialC0r | — | 16,187.05 lbf | — |
| Fatigue load limit, radialCur | — | 3,400 N | — |
| Fatigue load limit, radialCur | — | 764.388 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 365944 | — |
| Base Type | — | 1322 | — |
| Old Designation | — | ["1322M"] | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0190088480000 | — |
| Base product | — | 2305080601 | — |
| Bearing X designation | — | 1322-M | — |
| Mounting Manager ID | — | 1322-M | — |
| Grease application ID | — | 1322-M | — |
| Mounting dimensions | |||
| Minimum shaft shoulder diameterda min. | — | — | 123 mm |
| Maximum housing shoulder diameterDa max. | — | — | 227 mm |
| Maximum adjacent fillet radiusra max. | — | — | 2.5 mm |
| Ball protrusion beyond bearing faceb1 | — | — | 3 mm |
| Minimum diameter shaft shoulderda min | — | 124 mm | — |
| Minimum diameter shaft shoulderda min | — | 4.882 in | — |
| Maximum diameter of housing shoulderDa max | — | 226 mm | — |
| Maximum diameter of housing shoulderDa max | — | 8.898 in | — |
| Maximum fillet radiusra max | — | 2.5 mm | — |
| Maximum fillet radiusra max | — | 0.098 in | — |
| Product characteristics | |||
| Bore typeZ | — | Cylindrical | — |
| Type of SealWithout | — | Not sealed | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Product identity | |||
| Official product category | Self-aligning ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/self-aligning-ball-bearings | — | — |
| Structure group ID | BJ1_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Self-aligning ball bearing 13..-M, solid brass cage | — |
| Short Description | — | Self-aligning ball bearing | — |
| Properties | |||
| Retaining feature, inner ring | None | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Number of rows | 2 | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class | Normal | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 43.8 kg CO 2 e | — | — |
| Reference mass | |||
| Approximate catalogue mass | — | — | 11.5 kg |
| Technical Data | |||
| Bore Diameter (D) | — | 110 mm | — |
| Outside Diameter (D) | — | 240 mm | — |
| Width (B) | — | 50 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 165,000 N | — |
| Basic Static Load Rating, Radial (C0R) | — | 72,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 4,200 1/min | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Reference Speed (Nϑr) | — | 3,400 1/min | — |
| Fatigue Load Limit, Radial (Cur) | — | 3,400 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.23 | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 124 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 154.46 mm | — |
| Dynamic Axial Load Factor (Y1) | — | 2.78 | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 226 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Overhang Rolling Element (C1) | — | 2.7 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 202.5 mm | — |
| Dynamic Axial Load Factor (Y2) | — | 4.3 | — |
| Static Axial Load Factor (Y0) | — | 2.91 | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.