Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 11212 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF11212 TN960 × 110 × 62 mm | FAG11212-TVH60 × 110 × 62 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 11212 TN9 | 11212-TVH |
| Product family | Self-aligning ball bearings | — |
| Detailed type | Self-aligning ball bearing with extended inner ring | Self-aligning ball bearings |
| Series | — | 11212 |
| Bore diameterd | 60 mm | 60 mm |
| Outside diameterD | 110 mm | 110 mm |
| WidthB | 62 mm | 62 mm |
| Basic dynamic load ratingC | 31.2 kN | 30.5 kN |
| Basic static load ratingC0 | 12.2 kN | 11.5 kN |
| Fatigue load limitPu | 0.62 kN | 0.73 kN |
| Reference speednref | 9000 r/min | 6300 r/min |
| Limiting speednG | 3400 r/min | 6900 r/min |
| Mass≈m | 1.45 kg | 1.54 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Cage | Non-metallic | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.18 |
| Dynamic axial load factorY1 | — | 3.47 |
| Dynamic axial load factorY2 | — | 5.37 |
| Static axial load factorY0 | — | 3.64 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 1.5 mm |
| Minimum chamfer dimensionrmin | — | 0.059 in |
| Shoulder diameter outer ringD1 | — | 95.16 mm |
| Shoulder diameter outer ringD1 | — | 3.746 in |
| Shoulder diameter inner ringd1 | — | 78 mm |
| Shoulder diameter inner ringd1 | — | 3.071 in |
| Width retaining slotb | — | 7 mm |
| Width retaining slotb | — | 0.276 in |
| Hight retaining slott | — | 9 mm |
| Hight retaining slott | — | 0.354 in |
| Engineering — Abutment dimensions | ||
| Abutment diameter housingD a | max. 101 mm | — |
| Fillet radiusr a | max. 1.5 mm | — |
| Engineering — Calculation data | ||
| Permissible angular misalignmentα | 2.5 ° | — |
| Calculation factork r | 0.04 | — |
| Limiting valuee | 0.19 | — |
| Calculation factorY 0 | 3.6 | — |
| Calculation factorY 1 | 3.3 | — |
| Calculation factorY 2 | 5.1 | — |
| Engineering — Dimensions | ||
| Width outer ringC | 22 mm | — |
| Shoulder diameter inner ringd 1 | ≈ 78 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 95.6 mm | — |
| Chamfer dimensionr 1,2 | min. 1.5 mm | — |
| Engineering — Engineering specifications | ||
| Bore type | Cylindrical | — |
| Logistics | ||
| Product net weight | 1.45 kg | — |
| eClass code | 23-05-08-06 | — |
| UNSPSC code | 31171532 | — |
| Main Dimensions & Performance Data | ||
| Total widthB | — | 62 mm |
| Total widthB | — | 2.441 in |
| Width, outer ringBC | — | 22 mm |
| Width, outer ringBC | — | 0.866 in |
| Width, inner ringBi | — | 62 mm |
| Width, inner ringBi | — | 2.441 in |
| Basic dynamic load rating, radialCr | — | 30,500 N |
| Basic dynamic load rating, radialCr | — | 6,857.014 lbf |
| Basic static load rating, radialC0r | — | 11,500 N |
| Basic static load rating, radialC0r | — | 2,585.432 lbf |
| Fatigue load limit, radialCur | — | 730 N |
| Fatigue load limit, radialCur | — | 164.119 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 366341 |
| Base Type | — | 11212 |
| Old Designation | — | ["11212TV"] |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0167001980000 |
| Base product | — | 2305080602 |
| Bearing X designation | — | 11212-TVH |
| Mounting Manager ID | — | 11212-TVH |
| Grease application ID | — | 11212-TVH |
| Mounting dimensions | ||
| Maximum diameter of housing shoulderDa max | — | 101 mm |
| Maximum diameter of housing shoulderDa max | — | 3.976 in |
| Maximaler Hohlkehlradiusra max | — | 1.5 mm |
| Maximaler Hohlkehlradiusra max | — | 0.059 in |
| Product identity | ||
| Official product category | Self-aligning ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/self-aligning-ball-bearings | — |
| Structure group ID | BJ1_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Self-aligning ball bearing 112..-TVH, plastic cage |
| Short Description | — | Self-aligning ball bearing |
| Properties | ||
| Retaining feature, inner ring | Locating slot | — |
| Locating feature, bearing outer ring | Without | — |
| Number of rows | 2 | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 5.4 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 60 mm |
| Outside Diameter (D) | — | 110 mm |
| Width (B) | — | 62 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 30,500 N |
| Basic Static Load Rating, Radial (C0R) | — | 11,500 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 6,900 1/min |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Reference Speed (Nϑr) | — | 6,300 1/min |
| Width, Inner Ring (Bi) | — | 62 mm |
| Width Retaining Slot (B) | — | 7 mm |
| Fatigue Load Limit, Radial (Cur) | — | 730 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.18 |
| Shoulder Diameter Inner Ring (D1) | — | 78 mm |
| Dynamic Axial Load Factor (Y1) | — | 3.47 |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 101 mm |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm |
| Shoulder Diameter Outer Ring (D1) | — | 95.16 mm |
| Width, Outer Ring (Bc) | — | 22 mm |
| Dynamic Axial Load Factor (Y2) | — | 5.37 |
| Static Axial Load Factor (Y0) | — | 3.64 |
| Hight Retaining Slot (T) | — | 9 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 120 °C |
| Operating temperature max.Tmax | — | 248 °F |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.